Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B4WG7 BK102 - PA6-GF35 - BASF

Material Data Center offers the following functions for Ultramid® B4WG7 BK102:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Ultramid® B4WG7 BK102 is a high viscosity grade of PA6 reinforced with 35% glass fiber offering high strength and stiffness as well as creep resistance. Excellent melt strength makes Ultramid® B4WG7 BK102 ideally suited for extrusion and blow molding.
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 11500 / - MPa ISO 527
파단시 강도 183 / - MPa ISO 527
파단시 신율 2.5 / - % ISO 527
챠피 충격 강도 , +23°C 72 / - kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 10 / - kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 8 / - kJ/m² ISO 179/1eA
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 220 / * °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 203 / * °C ISO 75-1/-2
기타 특성건조/응축단위시험규격
밀도 1410 / - kg/m³ ISO 1183
특징
생산 공정
기타 압출, 중공 성형
인도 유형
검정
특성
Creep Resistance, Melt Strength
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬
기타 정보
사E성
PROCESSING
injection molding, Melt temperature, range: 254 - 271 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.